---

Current BreeCS Build: 4.9.7576

---

---

In order to start using BreeCS you will need a Paxton Net2 v6.04 PRO installation comprising of at least one ACU and two readers (v6.04 is included within the BreeCS installer but you must purchase a pro license from your local wholesaler). The connected readers can be any reader that paxton supports; Paxton, HID, iEvo Fingerprint, Handkey and so on.

If you wish to use biometrics and would like a fully integrated environment then please use iEvo for fingerprints and HandKey 2 for hand geometry scanning as BreeCS has inbuilt support for administering fingerprints/hands under these platforms.

In order to scan CSCS cards to check validity and retain data contained on the card you require a compatible HID Omnikey (or equivalent) reader. You also require the readers driver and the CSCS GoSmart Software for the physical card scanning (contained within the BreeCS installer). Please click here for a list of compatible readers.

---

---

Operating Systems Compatibility:

Microsoft Windows 7 [All Editions] (32 bit & 64 bit)
Microsoft Windows 8 [All Editions] (32 bit & 64 bit)
Microsoft Windows 10 [All Editions] (32 bit & 64 bit)
We advise using Microsoft Windows 7/8/10 Professional for Net2 & BreeCS.

---

A PC of the following specification is required in order to run Net2 and BreeCS software:

Intel® Pentium® Dual-Core 2.00GHz (or equivalent)
4GB RAM or greater
20GB free disk space
USB2 Port
256 colours @ 1024 x 768 (or higher)
Serial port, USB2 or Ethernet for ACU connection

---

For optimal performance we recommend the following PC specification:

Intel® Core™2 Quad Processor (or equivalent)
8GB RAM or greater
20GB free disk space
USB2 Port
256 colours @ 1280 x 768 (or higher)
USB2 or Ethernet for ACU connection

---